Belt Type Bucket Elevator for feed
Tuesday March-15 2022 08:56:34
The belt type bucket elevator for feed is constructed with rubber belt as traction, which is suitable for conveying lighter materials, such as feed, grain, coal, etc.
The temperature of the material being conveyed should not exceed 60°C.
The outstanding advantages of the belt bucket elevator for feed:
1. The belt type bucket elevator for feed uses rubber belts as the traction member. Compared with the chain bucket elevator, there is no impact caused by the traction member, so the working noise is low;
2. The lifting height of the belt bucket elevator for feed can reach 100 meters, and the conveying capacity in 1 hour can reach 656 cubic meters, which can meet the needs of feed lifting.
3. Adopt inflow feeding, no need for hopper to excavate, rarely collide or squeeze between materials, reducing mechanical wear;
4. The dense arrangement of large-capacity hoppers will hardly cause feed back, so the power consumption is less and the improvement efficiency is higher.
Working principle of belt bucket elevator for feed:
When the feed belt bucket elevator is started, the operation drives the hopper on the belt to dig out the feed, and the feed is thrown out after reaching the top, thereby realizing the conveying and lifting of the feed.
